How to set this chiller?

How to set this chiller?

1.Turn on the switch, the display shows what the current ambient temperature is.
2.Press the SET key to set our target temperature, for example, we want to reach 73°F
3.After the setting is complete, the screen will display the current temperature and then gradually cool down.
4.The "COOL" light is on, indicating that the machine is working
5.You can feel the chiller vibrating
6.Hold the SET key for about 8 seconds to enter F1 mode
7.Press the SET key again to see the number 5
10.The number 5 represents: the chiller will not run unless the target temperature is lower than the ambient temperature. Please do not change this number randomly.

    • Related Articles

    • Why doesn't my chiller work?

      Please kindly help us confirm the following information: 1.Could you please kindly advise us the current temperature of water and the temp you set? Because the set temperature must be 5° lower than the actual water temperature for the chiller to work ...

    • Why doesn't my chiller work after placing different place to use?

      1.Make sure the water pump and chiller are plugged in. 2.After the machine is started, the machine will start for a few minutes and will not cool down immediately. If the set temperature is similar to the water temperature, the water will not cool ...

    • Why my chiller Auto-shutoff?

      No worry, it is normal that the machine will stop working after cooling to the set temperature. To confirm the issue in detail, could you please kindly help us do the following information: 1. Whether the screen is automatically closed. 2. Will the ...

    • What do P1/2/3/4 means (old models only have F1/F2)?

      P1 refers to the temperature difference (corresponding to the old model F1). If you set it to 5 and the chiller is set to 47, you're going to have a 5 degree temperature difference around 47. P2 refers to delayed start. The default delay time is ...

    • Can I use the Chiller with 110V?

      The chiller in US version is 110V, EU version is 220V. You can use it with 220V through transformer