Why the Display Shows Water Shortage Protection

Why the Display Shows Water Shortage Protection

Display Shows Water Shortage Protection

Causes and Solutions:

1.Check if the water inlet valve is open and if the water pressure is sufficient and continuous.

2.Check if the ice-making drain is continuously draining water. If so, clean the drain valve or tie a knot in the drain pipe to prevent water from draining out.

Display Shows High Pressure Protection

Causes and Solutions:

3.Check if the water inlet valve is open and if the condenser water pressure is sufficient. It is recommended to connect to a mains water supply.

For air-cooled models, check if the cooling fan is operating normally.

4.If the high-pressure protection is triggered immediately upon startup, short-circuit the two wires on the pressure switch.

Note:

For Commercial Ice Machine 650 LBS/24H, 400 LBS Storage Capacity

 

SKU:7031751/7031754

    • Related Articles

    • Why Normal Display and Water Flow but No Ice Production

      Normal Display and Water Flow but No Ice Production Solutions: 1.If the machine lacks sufficient ventilation space, turn it off and check if the display temperature exceeds 40°C. If it does, pull out the machine, allow it to cool, and restart. 2.If ...

    • Why doesn't my chiller get cool the water?

      Please kindly help us confirm the following information: 1. Please check whether the work indicator light is on. 2. What is the ambient temperature and the temperature setting on the chiller? 3. What is the temperature displayed on the chiller and ...

    • Why does my beverage refrigerator shows E1?

      When the E series code appears on the display, it proves that the temperature sensor is faulty. Find the corresponding faulty probe and check whether it is poorly connected or faulty. Replace it according to the instructions. You can contact customer ...

    • Why the Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank?

      Continuous Water Inflow by the Inlet Float and Water Leakage from the Water Tank Causes: The tank drain pipe is not properly secured. Excessive water pressure. The water tank has shifted out of position. Solutions: 1.If the tank drain pipe (rubber ...

    • Why the"Ice Full" Display on Startup

      "Ice Full" Display on Startup Causes and Solutions: 1.If the ice full switch is not properly secured, reattach it. 2.If the ice diverter panel has fallen or is incorrectly installed, adjust and reinstall it. 3.If both the ice full switch and ice ...