This can happen when pump is operated in bypass mode for longer than 3 minutes or if low voltage/amps. Ensure that pump is not left running for longer than 3 minutes without depressing Transfer Gun trigger. The wiring loom has been extended using ...
This can be caused by dirt or debris entering the pump and becoming caught in the working parts. Remove the end cover of the pump by first unscrewing the three Socket Head screws and lifting off the cover. Clean the impeller vanes ensuring you remove ...
The non-return valve in the outlet of the pump may be jammed shut Remove the outlet hose from the pump.Operate the white plastic valve in the outlet port of the pump manually(by pushing it in and out), to ensure it moves freely.
In order to move forward to your case, could you please kindly help us do the following troubleshooting methods: 1.Please make sure the battery wires are properly connected to the battery. RedClip to +ve. (The red wire is cut and connected to the + ...
In order to move forward to your case, could you please kindly help us confirm the following information? 1. Where is the noise coming from? 2. Motor: Turn on the gun to see if the sound will be smaller. If convenient, could you please kindly help us ...
In order to move forward to your case, could you please kindly help us confirm the following information? 1. Check if there is any foreign matter 2. Please check whether the fuel tank is higher than the oil gun. In this case, the oil gun will also ...